Product Details
Also name:Grade 2 titanium plate ,Grade 2 titanium sheet.
We can supply Commercially pure titanium grade 2 specifications as follows:
Thickness: 0.5-70 mm
The width:≤ 2000 mm
The length:≤ 6000 mm
Special requirements can be customized as customer’s requirement
Standard : ASTM B265 ASME SB265 ASTM F67 AMS 4911
Test report: MA, SGS, etc
Brand name: WIT
Commercially pure titanium grade 2 sheet features:
1. GR2 titanium plate is higher purity in pure titanium plate. Its ductility is slightly lower than Grade 1 titanium plate, and its hardness is slightly higher than Grade 1 titanium plate.
2. The purity is slightly lower than Grade 1 titanium plate, and the corrosion resistance is between Grade 1 titanium plate and Grade 3 titanium plate.
3. Higher physical and mechanical properties than GR1 titanium plate
4. Non-toxic, non-magnetic, no radiation, good biocompatibility.
Mechanical Properties
Grade |
Tensile strength, MPa (min) |
Yield strength, MPa (min) |
Elongation, %(min) |
Reduction of Area, %(min) |
Gr2 |
345 |
275-450 |
20 |
- |
Chemical Component
Grade |
Ti |
N,
max
|
C,
max
|
H,
max
|
Fe,
max
|
O,
max
|
Residuals |
Max each |
Max
total
|
Gr2 |
Main |
0.03 |
0.08 |
0.015 |
0.30 |
0.25 |
0.1 |
0.4 |
Application fields:
1. Chemical industry.
2. Electric power.
3. Navigation.
4. Medical and surgical implantation.
5. Other fields which require slightly higher physical performance to make equipment or accessories
Product picture
The artcraft of process titanium sheet:
Hot forging :A process of forging above the recrystallization temperature of a metal.
Hot rolling:A process of rolling at temperatures higher than recrystallization.
Cold rolling:A process in which the plastic deformation temperature is lower than the recovery temperature.
Annealing: A process by which a metal is heated slowly to a certain temperature, held for sufficient time, and then cooled at a suitable rate, usually slowly, and sometimes controllably.
Pickling: to remove thin films such as oxides from the surface of a metal by immersing the product in an aqueous solution such as sulfuric acid.Is electroplating, enamel, rolling and other processes of pre - treatment or intermediate treatment
http://www.wit-titanium.com/